4" Acrylic Emblem made from 1/8" acrylic with 3m backing to attach to car
Car must be cleaned prior to attaching for longevity - press for at least 10 seconds and allow several days before washing. Salt and UV resistant.
Easy to Install
1- Don’t install outside with extreme freezing temperatures, find an indoor, garage area to do the installation.
2- These badges are NOT flexible by design. Don't install in areas have slight curve, look for flat area is around 4 to 6 inches below the top fender line.
3- Remove if any existing emblems and badges that are in your way.
4- Clean the surface with a clean rag and alcohol and then completely dry the area (It needs to be completely dry or the tape won’t stick..
5- Apply a heat for a few seconds to the area with a hair dryer to keep warm if surface is a little cold. (Optional)
6- Peel off the backing paper that protects the adhesive on the badge.
7- Centralize in the area where be apply.
8- After install press badge onto the surface and apply equal and firm pressure for at least 30 seconds.
9- Repeat from step 3 for the others.
10- Wait couples of days before wash the vehicle.
IMPORTANT NOTE ON INSTALLATION AND REMOVAL OF EMBLEMS OR PASS THRU CAR WASH:
Passing thru car wash or Installing or removing emblems is done at your own risk to the emblem, vehicle, tools, yourself and/or others. We are not responsible for any damage to your vehicle, emblems or any injury that may be incurred.
CERAMIC COAT TREATMENT please ask the person or company who did the job and ask how to remove the ceramic coat only in the area you want to install this item.
Please remember that colors vary slightly between monitors
THESE ITEMS ARE MADE TO ORDER AND CAN TAKE UP TO TWO WEEKS TO SHIP
All of our items are made to order specifically for you. Because of that, all sales are final. Please make sure you are ordering the correct items and reach out with any questions prior to making a purchase. We want you to love it!